Ashley Morrison's Blog

November 24, 2017

Black Friday.

“No room lights on” is one of the things that a lot of editors insist on these days, which actually became like ‘a rule’ 12 years ago. So when shooting a home which we are hoping a national or international magazine will run with, that is something that we would obviously keep in mind.

Which for the most part isn’t a problem, as many homes are quite bright to start with, as most of their walls and ceilings will often be painted white or a light colour.

But that wasn’t the case here as you can see…
One of the first images taken in Peggy Bell's townhouse in the County Down seaside town of Bangor.
.. in the sitting room of this townhouse which overlooks Ballyholme Bay – which did look good with all the room lights and lamps turned on – however, when turned off, well as you can see here…
One of the first images taken in Peggy Bell's townhouse in the County Down seaside town of Bangor.
.. even with two 3K’s blasting through the windows on this rather dull day, it was still looking pretty dark in there.

And so yes, this one required some serious lighting – and that look on Dianne’s face here…
One of the first images taken in Peggy Bell's townhouse in the County Down seaside town of Bangor.
.. kind of summed up how I was feeling too when trying to shoot this up-stairs sitting room area wink.

Should definitely have hired an assistant for this, as I reckon I actually had to pump about 3 times as much light into this room than I normally would; however, I must say I was very pleased with the final result here…
“Peggy
.. as Peggy posed to perfection.

A house which as you can see here…
“The
.. I had actually shot before – and talked about here: House of fun.

Couldn’t be more different – but yet in some ways it was the same, as it was all about the details…
“The
.. as every area was like picture perfect.

Still, it was black…
One of the first images taken in Peggy Bell's townhouse in the County Down seaside town of Bangor.
.. and the weather didn’t help – however, I have to say that it did look good in the end…
“The
.. and definitely a little bit different to the norm.

Which is something that we would always be on the lookout for, as would the editors too.

A challenge…
One of the first images taken in Peggy Bell's townhouse in the County Down seaside town of Bangor.
.. especially when I need to turn the room lights off…
One of the first images taken in Peggy Bell's townhouse in the County Down seaside town of Bangor.
.. but then I guess if it were easy, everyone’s images would look like this…
“The
.. and then it really would be a Black Friday for me wink.

Anyway, just want to say a big thanks to Peggy and Phil for inviting us into your amazing home and to Sean too, from Dianne & me on this Black Friday.

Advertisements

September 4, 2016

Forward thinking.

With a shoot coming up a few weeks time, which will mean not only travelling with Dianne & Claudio, but also with all my gear as well as theirs – then it was time to think about how I could put more stuff up on top of the wagon – without spending more than I needed to or putting a roof-rack up there that couldn’t be easily removed by me (on my only) once I was back at the base.

I already have 4 roof bars for the Land Rover – which I bought a few years ago to carry 8×4 sheets of plywood and insulation boards – so at first I considered just using a sheet of marine plywood – which when everything would have been put on top of it and strapped down, would have worked fine.

However, I thought, what about when all the gear is of it – how will I then make sure that it doesn’t fly off?​

Anyway, after having looking once again at all the various roof racks available for this type of Land Rover by various companies throughout the UK – including the beautiful Highlander roof rack by Safety Devices (which neatly follows the profile of the vehicle’s roof), which I absolutely love the look of – I finally decided to call in to see the guys at Coates Engineering, one day after going for my daily swim at the Bangor Aurora Aquatic and Leisure Complex – which is were I tend to do a lot of my ‘forward thinking’ these days, as I remember those wonderful days in the past, when I was actually able to swim more than 100 metres without having to stop to catch my breath wink

Anyway, this was the result…
A 6' x 4' sheet of galvanized​ steel mesh bolted on to the roof bars of the Land Rover.
.. which is a 6′ x 4′ sheet of galvanized​ steel mesh – which they designed some bolts for, as seen here…
A 6' x 4' sheet of galvanized steel mesh bolted on to the roof bars of the Land Rover.
.. to hold it to the roof bars…
A 6' x 4' sheet of galvanized​ steel mesh bolted on to the roof bars of the Land Rover.
.. from underneath…
A 6' x 4' sheet of galvanised steel mesh bolted on to the roof bars of the Land Rover.
.. which is then held in place from above by this little plate…
A 6' x 4' sheet of galvanised steel mesh bolted on to the roof bars of the Land Rover.
.. and squared of at the back to prevent me from catching it as I push the cases up there…
A 6' x 4' sheet of galvanised steel mesh bolted on to the roof bars of the Land Rover.
.. as some of them are quite heavy.

Perfect…
A 6' x 4' sheet of galvanised steel mesh bolted on to the roof bars of the Land Rover.
.. and I think it looks pretty good to, after I painted it black, since image is everything after all wink

So there you have it – a very simple and cost-effective solution in the end – which simply means we are now already to go, on our next exciting adventure smile

Blog at WordPress.com.